When you build a house, it just doesn’t end there. There are numerous aspects that influence home maintenance. As the years pass, a number of bathroom fixtures will require adequate repair. The toilet is unquestionably the most commonly utilised and dependable household fixture. Aside from routine cleaning every few days, your toilet is typically low-maintenance. It must be operational all year long.
One of the most inconvenient and costly plumbing concerns that homeowners confront is a leaking toilet. The creation of a puddle around the toilet or moisture spontaneously accumulating on the toilet’s tank is a common tell-tale indicator of a leaking toilet. A toilet that keeps running or flushing even when it isn’t in use is another red flag. As a result, if left unattended, a toilet leak can have a significant influence on your water bill.
The toilet leak needs to be fixed ASAP. If there is continuous leakage or if there is a plumbing emergency, contact the plumbing professionals immediately to cut off the water supply that adds to the leakage. You should take notice of even minor leaks and figure out the root cause and initiate steps in order to rectify it. Here we discuss a few of the top reasons why your toilet is leaking.
Damaged Flapper
What is a flapper?
A rubber or plastic flapper with a seal that prevents water from leaking out of the flush tank is referred to as a flapper. It serves as a barrier between the toilet bowl and the flush tank. It is known to all of you that when we flush the tank, the water held within the tank is flushed down to the bowl, getting rid of the stains or microorganisms. Once the flapper has been retracted and the tank emptied, the flush tank will be filled with water for the next use.
What happens when the flapper is damaged?
Although flappers are basic mechanisms, they are not impervious to damage. The flapper can stretch, crack, or break with time.Otherwise, it will be unable to regulate the amount of water that flows from the tank to the toilet bowl. As a result, water frequently seeps from the tank into the bowl, making a bothersome trickling sound. This is referred to as a silent leak by plumbers since it is difficult for many homeowners to notice. You shouldn’t be able to see any water dripping into the bowl until it’s full. Continuous loss of water can have a huge effect on your water bill.
Stuck toilet flapper
What is a toilet flapper?
The toilet flapper is a rubber seal that keeps water in the tank by closing the flush valve and then opening it when the handle lever is pressed.
What happens when the toilet flapper is stuck?
Even though a toilet flapper appears to be in fine working order, it may not be doing its function properly. Flappers frequently stick open, allowing water to flow continuously from the tank into the bowl. The flushing handle on your toilet will most likely feel floppy and unresponsive if this happens.
It’s a simple five-minute activity to investigate most toilets. By taking the tank’s lid off, you can make sure that the flapper is connected to the flush handle. It’s possible that the chain fell off and just needs to be put back on the handle. To make sure it works, you may need to replace the part that moves the flapper up and down. The new flapper is available as a single part or as part of a toilet repair kit, allowing for a do-it-yourself fix.
Cracked supply line
What is a supply line?
The supply line is the component of the toilet that delivers water to the tank for flushing. The supply line is usually found outside of the toilet and connects to two points: the supply valve, which is usually built into the wall, and the toilet’s tank. Plastic, vinyl, or stainless steel are commonly used for these lines.
What happens when the supply line is damaged?
When the supply line’s joints become weak or loose as a result of wear and tear or an accidental physical impact, problems can emerge. Turn off the water to your toilet or bathroom if you wish to do the repairs yourself. The fractured supply line can then be carefully removed. After applying the plumbers tape to the new line, secure it to the water valve and the toilet. Avoid overtightening the new line to avoid damaging it. You should test the new line after installation to make sure it doesn’t leak.
Damaged toilet tank
What is a toilet tank?
The toilet tank is a well-known element of the toilet. This houses all of the toilet’s flushing water as well as the flushing mechanics. Because of age or physical impact, the toilet tank might crack over time. Fortunately, very few cracks do not need the replacement of your toilet. A sealer can be used to swiftly fix these plumbing problems. Larger cracks, on the other hand, may worsen and necessitate the replacement of your toilet.
What happens when the toilet tank is damaged?
You may have a cracked or fractured tank if you find water on the floor surrounding your toilet. The only way to replace a damaged toilet tank to its original working condition is to install a new toilet. The easiest way to avoid damage to your other bathroom fixtures is to replace your old toilet rather than rely on putty and sealants. In the case of a two-piece toilet, it is always better to buy a new tank rather than replace it with the entire unit.
Damaged toilet float
What is a toilet float?
The ball that is seen floating on top of the water in the toilet tank is known as the toilet float, and it is placed inside the toilet tank. When the water level in the toilet tank falls below a certain threshold, the mechanism that refills the tank is activated.
What happens when the toilet float is damaged?
The fill valve of the toilet tends to run constantly when this portion is damaged. Wear and tear, as well as improper handling, are the most typical causes of damage to this part. Repairing a defective toilet float is, fortunately, a simple procedure. A replacement float for most toilets is simple to install, as it simply clicks into place without the use of tools or any effort.
Damaged flush valve or fill valve
What is a flush valve or a fill valve?
When the tank’s water level falls, the fill valve allows the water to refill the tank. When triggered (primarily by the flush lever/button), the flush valve permits water from the tank to flow into the bowl.
What happens when the flush valve or a fill valve is damaged?
A malfunctioning fill valve might cause the toilet to either run continuously or flush irregularly. In either case, it signifies that the tank isn’t being filled properly i.e it’s either overfilled or underfilled. Meanwhile, a broken flush valve will cause your toilet to run continuously.
Bowl damage
What is a toilet bowl?
The large base on which the user sits is known as the toilet bowl. Most toilet bowls are constructed of vitreous china, a waterproof material that resists stains well and has an oblong or round hole to collect waste.
What happens when the bowl damage is damaged?
Your toilet’s bowl damage might be the reason for your leak. Because the toilet bowls are designed to hold water, if there is a crack, it will most likely leak right onto your bathroom floor. You risk pouring unhealthy wastewater on your floor if a crack in heavily used porcelain or ceramic ware is not thoroughly sealed with putty or glue. It’s recommended to replace the whole toilet if any structural component of it is cracked and leaking.
Conclusion
Leaky toilets may appear to be a minor issue, and they do not occur frequently, but they can turn out to be a massive problem if not addressed immediately. At best, they can raise your water bill; at worst, they can ruin your bathroom’s tile and subfloor. You can probably sort out how to address the following issues and probably even fix them if you identify their origin. For these reasons, we strongly advise that all toilet plumbing concerns be handled by plumbing professionals. Expert plumbers can assist you in completing the repair quickly.